| Massachusetts - 1909 - 1182 σελίδες
...0 per cent, above or 3 per cent, below the theoretical weight. (gr) For all plates ordered to gage there will be permitted an average excess of weight...that specified in the following table : — TABLE OK ALLOWANCES TOR OVERWEIGHT FOR RECTANGULAR PLATES WHEN ORDERED TO GAGE'. [Plates will be considered... | |
| American Railway Master Mechanics' Association - 1901 - 622 σελίδες
...weight. When too inches wide and over, ten per cent above or three per cent below the theoretical weight. For all plates ordered to gauge there will be permitted...in amount to that specified in the following table : 9. TABLE OF ALLOWANCES FOR OVERWEIGHT FOR RECTANGULAR PLATES WHEN ORDERED TO GAUGE. Plates will be... | |
| Theodore Cooper - 1890 - 232 σελίδες
...Alterations. Branding. Chemical Analysis. Finish. Variation In Weight. Shipments. Quality of Paint. For all plates ordered to gauge, there will be permitted...on the order equal in amount to that specified in following table: 141. Shipment! of material from the mills will not be permitted until after the tests... | |
| Harry Huse Campbell - 1896 - 432 σελίδες
...rejection,* except in the case of sheared plates ordered to gauge, when there will be permitted an excess of weight, over that corresponding to the dimensions...in amount to that specified in the following table : or ALLOWANCE FOR OVERWEIGHT FOR RECTANCH-LAR PLATES. Thickness of Plate. i inch. i A J over i| Width... | |
| Joseph W. Bramwell - 1896 - 398 σελίδες
...4 6 For plates over j£ inch thick, 3^ 5 For all plates ordered to gauge there will be permitted an excess of weight over that corresponding to the dimensions...the order equal in amount to that specified in the above table. RIEHLE BROS. TESTING MACHINE Co. TESTING LABORATORY, 1424 North Ninth Street, Philadelphia,... | |
| John Butler Johnson - 1897 - 846 σελίδες
...square inch. Elastic limit, not less than one half the ultimate strength. Elongation, 25 per cent. 12. For all plates ordered to gauge there will be permitted...in amount to that specified in the following table. ]>!>» vided no plate shall be rejected for ligh^ gauge measuring .01" or less below the ordered thickness... | |
| John Butler Johnson - 1897 - 866 σελίδες
...permitted an when ordered average excess of weight over that corresponding to the dimensions on to Gauge, the order equal in amount to that specified in the following table, pn>vided no plate shall be rejected for light gauge measuring .01" or less below the ordered thickness... | |
| John Butler Johnson - 1898 - 906 σελίδες
...inches wide and over, 10 per cent above or 3 per cent below the theoretical weight. ********** * (<7) For all plates ordered to gauge there will be permitted...amount to that specified in the following table : TABLE OP ALLOWANCES FOR OVERWEIGHT FOR RECTANGULAR PLATES WHEN ORDERED TO OADQE. Plates will be considered... | |
| John Butler Johnson - 1898 - 880 σελίδες
...inches wide and over, 10 per cent above or 3 per cent below the theoretical weight. ********** (/) For all plates ordered to gauge, there will be permitted...the order equal in amount to that specified in the table on p. 761. FINISH. 14. Finished material must bo free from injurious seams, flaws or cracks,... | |
| John Butler Johnson - 1898 - 906 σελίδες
...inches wide and over, 10 per cent above or 3 per cent below the theoretical weight. ********** (f) For all plates ordered to gauge, there will be permitted an average excess or weight over that corresponding to the dimensions on the order equal in amount to that specified... | |
| |