| American Society for Testing Materials - 1920 - 868 σελίδες
...specimen is not set perpendicular to the base of the support or if the load is eccentrically applied." "The specimen shall be examined immediately after...develop later due to the rapid cooling of the furnace." In pursuance of the report of Sub-Committee VI, the committee recommends that the present Tentative... | |
| American Gas Institute - 1916 - 646 σελίδες
...test. Completing the Test : At the expiration of the time of heating as required by the specifications, the supply of heat shall be stopped and the furnace allowed to cool during not less than 10 hours before removing the load and examining the test specimen. After the test specimen has cooled... | |
| 1919 - 382 σελίδες
...on each side of the beam. 7. (a) At the expiration of the time of heating, the supply completing the of heat shall be stopped and the furnace allowed to cool, during Test< not less than 5 hours before removing the load and examining the test specimen. (ft) After the... | |
| 1921 - 936 σελίδες
...required to give the desired loading should be equally distributed on each side of the beam. 7. (a) At the expiration of the time of heating, the supply...be stopped and the furnace allowed to cool, during IOUU 1400 1200 X '^ ^" S IM»M \>2 Y* / J '/ / / *IOOO s r 3" o> ?> A s 7 Li* /L: //" / "°. 800 S... | |
| American Society for Testing Materials - 1917 - 908 σελίδες
...required to give the desired loading should be equally distributed on each side of the beam. 7. (a) At the expiration of the time of heating, the supply...removing the load and examining the test specimen. (6) After the test specimen has cooled to the room temperature, it shall be remeasured as before described,... | |
| American Society for Testing and Materials - 1921 - 920 σελίδες
...required to give the desired loading should be equally distributed on each side of the beam. 7. (a) At the expiration of the time of heating, the supply...be stopped and the furnace allowed to cool, during - § i 1 i 1 1 II </ r x^ f"' --*--( 2f — 0-. ,.•"' / s ',"' V J / Temperature, deg. Cent. / •'/... | |
| American Society for Testing Materials - 1918 - 774 σελίδες
...heating, the supply Completing the of heat shall be stopped and the furnace allowed to cool, during Test not less than 5 hours before removing the load and examining the test specimen. (b) After the test specimen has cooled to the room temperature, it shall be remeasured as before described,... | |
| American Society for Testing Materials - 1919 - 830 σελίδες
...on each side of the beam. 7. (a) At the expiration of the time of heating, the supply Completing the of heat shall be stopped and the furnace allowed to cool, during Test> not less than 5 hours before removing the load and examining the test specimen. (b) After the... | |
| |