Τι λένε οι χρήστες - Σύνταξη κριτικής
Δεν εντοπίσαμε κριτικές στις συνήθεις τοποθεσίες.
Άλλες εκδόσεις - Προβολή όλων
Specifications, Tolerances, and Other Technical Requirements for Commercial ...
Πλήρης προβολή - 1916
acceptance tolerances accurately actual addition adjustable amount applied automatically avoirdupois balance basic become bottle Bureau capacity Class clear combination compartment computing condition Conference constructed container correct corresponding cubic inches deficiency defined definite delivery designed determined device difference discharge rate effective equal equipment error exactly excess feet figures Fluid drams fluid ounces gage gallon graduated interval graduations grains greater Handbook incl included indicating elements individual installation intended least length less limited liquid load maintenance tolerances marked maximum means mechanism ment meter mile milk nominal capacity normal official one-half operation overregistration particular percent performance permanently pint position pounds quart recording regulations Replacement Sheet requirements respect retail RETURN rounded scale seal shown side specifications square Standards suitable surface tank taximeter tion troy unit vehicle weighbeam weights and measures yard zero
Σελίδα 153 - Square Measure 144 square inches (sq. in.) = 1 square foot (sq. ft.) 9 square feet = 1 square yard (sq.
Σελίδα 153 - Cubic Measure 1728 cubic inches (cu. in.) =1 cubic foot (cu. ft.) 27 cubic feet = 1 cubic yard (cu. yd.) 128 cubic feet = 1 cord (cd...
Σελίδα 39 - ... that is not so positioned that its indications may be accurately read and the weighing or measuring operation observed from some position which may reasonably be assumed by a customer. (9) Violate any provision of this Act or of the regulations promulgated under the provisions of this Act for which a specific penalty has not been prescribed.
Σελίδα 167 - The weight in milligrams ot precious metal obtained from one assay ton of ore gives directly the number of troy ounces to the net ton.
Σελίδα 29 - ... in proving the size, quantity, extent, area, or measurement of quantities, things, produce, or articles for distribution or consumption purchased or offered or submitted by such person or persons for sale, hire, or award...
Σελίδα 156 - Linear Measure 10 millimeters (mm) = 1 centimeter (cm) 10 centimeters = 1 decimeter (dm) = 100 millimeters 10 decimeters = 1 meter (m) = 1,000 millimeters 10 meters = 1 dekameter (dam...
Σελίδα 91 - ... the name and address of the person, firm or corporation, to whom the applicant is referred or sent for work or employment.
Σελίδα 154 - LIQUID MEASURE When necessary to distinguish the liquid pint or quart from the dry pint or quart, the word "liquid" or the abbreviation "liq" should be used in combination with the name or abbreviation of the liquid unit.
Σελίδα 36 - ... finest graduations with which it is used, unless the indicator and the graduations are in the same plane, in which case the distance between the end of the indicator and the ends of the graduations, measured along the line of the graduations, shall be not more than 0.04 inch.