Elementary Course in Mechanical Drawing for Manual Training and Technical Schools ...: With Chapters on Machine Sketching and the Blue-printing Process, Μέρος 1

H. Speakman, 1904 - 189 σελίδες

Τι λένε οι χρήστες - Σύνταξη κριτικής

Δεν εντοπίσαμε κριτικές στις συνήθεις τοποθεσίες.

Άλλες εκδόσεις - Προβολή όλων

Συχνά εμφανιζόμενοι όροι και φράσεις

Δημοφιλή αποσπάσματα

Σελίδα 83 - In a right triangle, the side opposite the right angle is called the hypotenuse and is the longest side.
Σελίδα 80 - AC about 3| inches long and assume the point P about 1 ^ inches above A C. Through the point P draw an oblique line FE forming any convenient angle —about 60 degrees — with A C.
Σελίδα 69 - A Sphere is a body bounded by a uniformly curved surface, all the points of which are equally distant from a point within called the center.
Σελίδα 158 - A right circular cone or cone of revolution is a cone whose axis is perpendicular to the base. It may be generated by the revolution of a right triangle about one of the perpendicular sides as an axis.
Σελίδα 84 - This is so because the sum of the three angles of a triangle is always equal to two right angles, as the pupil will learn in more advanced geometry.
Σελίδα 68 - A right angle is formed when one straight line meets another straight line so as to make the adjaFigure 47.
Σελίδα 101 - A right prism is a prism whose lateral edges are perpendicular to the planes of the bases.
Σελίδα 84 - To construct a triangle when two sides and the included angle are given.
Σελίδα 83 - The altitude of a triangle is the perpendicular distance from the vertex to the base or the base produced.
Σελίδα 85 - The center of an arc is the center of the circle of which the arc is a part.

Πληροφορίες βιβλιογραφίας