the mechanics, machinists, and engineer's practical book of reference


Αναζήτηση στο βιβλίο

Τι λένε οι χρήστες - Σύνταξη κριτικής

Δεν εντοπίσαμε κριτικές στις συνήθεις τοποθεσίες.


Συχνά εμφανιζόμενοι όροι και φράσεις

Δημοφιλή αποσπάσματα

Σελίδα 39 - To find the solidity of a spheroid. RULE. Multiply the square of the revolving axis by the fixed axis, and by *5236, and the product will be the solidity.
Σελίδα 33 - Any circle whose diameter is double that of another contains four times the area of the other.
Σελίδα 27 - Of four-sided figures, a square is that which has all its sides equal, and all its angles right angles.
Σελίδα 267 - ... they are dissolved. Then mix the whole with a sufficient heat. Keep the glue in a phial closely stopped, and when it is to be used, set the phial in boiling water.
Σελίδα 266 - ... and, in another vessel, dissolve as much isinglass, previously a little softened in water, (though none of the water must be used), in French brandy or good rum, as will make a...
Σελίδα 235 - SOLDERS. For Lead. — Melt one part of block tin, and, when in a state of fusion, add 2 parts of lead. Resin should be used with this solder. For Tin. — Pewter, 4 parts ; tin, 1 ; bismuth, 1. Melt them together and run them into slips.
Σελίδα 38 - RULE. — To the sum of the areas of the two ends add the square root of their product ; multiply this sum by the perpendicular height, and -^ of the product is the solid content.
Σελίδα 128 - Bring the edges of the pieces of shell to fit each other, observing to give the same inclination of grain to each, then secure them in a piece of paper, and place them between hot irons or pincers ; apply pressure, and let them cool.
Σελίδα 65 - RULE. — Divide the weight to be raised by twice the number of pulleys in the lower block ; the quotient will give the power necessary to raise the weight. EXAMPLE. — What power is required to raise 600 Ibs., when the lower block contains six pulleys ? 600 6 x 2 = 50 Iks., Ans.
Σελίδα 53 - To find the centre of Gyration, multiply the weight of the several particles by the squares of their distances from the centre of motion, and divide the sum of the products by the weight of the whole mass; the square root of the quotient will be the distance of the centre of gyration, from the centre of motion.

Πληροφορίες βιβλιογραφίας