Industrial Engineering: A Handbook of Useful Information for Managers, Engineers, Superintendents, Designers, Draftsmen and Others Engaged in Constructive Work, Τόμος 1W. M. Barr Company, 1918 |
Περιεχόμενα
| 18 | |
| 19 | |
| 20 | |
| 21 | |
| 22 | |
| 23 | |
| 24 | |
| 25 | |
| 26 | |
| 27 | |
| 28 | |
| 29 | |
| 30 | |
| 31 | |
| 32 | |
| 33 | |
| 34 | |
| 35 | |
| 36 | |
| 37 | |
| 46 | |
| 47 | |
| 48 | |
| 49 | |
| 50 | |
| 79 | |
| 100 | |
| 158 | |
| 197 | |
| 269 | |
| 383 | |
| 421 | |
| 443 | |
| 465 | |
| 529 | |
| 534 | |
| 537 | |
| 569 | |
| 609 | |
Άλλες εκδόσεις - Προβολή όλων
Συχνά εμφανιζόμενοι όροι και φράσεις
acid alloy aluminum angle annealed bars bath bolts brittle carbon steel castings cementite cent chemical chromium clay cold color combined composition compounds containing cooling copper Cosine crucible Cube cubic foot cubic inch Diam diameter elastic limit elongation equal feet finished flux forging fracture furnace gauge grade graphite hard hardening hydrogen Inches Inches Inches ingot inspector length less logarithm LOGARITHMS OF NUMBERS manganese manufacture martensite material Melting point mercury metal meter molten Multiply NAVY DEPARTMENT nickel nuts open-hearth oxide oxygen pearlite phosphorus pig iron plates pound per cubic pounds per square properties quenching radius reduced rivets rods rolled rubber sample screw SCREW THREADS sheets silica silicon sine slag sodium solid Specific gravity Specific heat square foot square inch standard sulphur surface Tangent temperature tensile strength test pieces test specimens thickness tool steels tungsten United vanadium weight width wire wrought iron zinc
Δημοφιλή αποσπάσματα
Σελίδα 42 - Square Measure 144 square inches = 1 square foot 9 square feet = 1 square yard 30£...
Σελίδα 465 - Specimens shall be cut cold from coupons molded and cast on some portion of one or more castings from each melt or from the sink heads, if the heads are of sufficient size. The coupon or sink head, so used, shall be annealed with the casting before it is cut off.
Σελίδα 273 - ... for continuous and efficient inspection. (b) Any inspector of the Administration shall have free access at all times to all parts of the establishment...
Σελίδα 162 - RULE.* To the sum of the areas of the two ends add four times the area of a section parallel to and equally distant from both ends, and this last sum multiplied by £ of the height will give the solidity.
Σελίδα 274 - Stiffeners shall fit neatly between flanges of girders. Where tight fits are called for, the ends of the stiffeners shall be faced and shall be brought to a true contact bearing with the flange angles.
Σελίδα 92 - RULE.* Multiply the sum of the parallel sides by the perpendicular distance between them, and half the product will be the area.
Σελίδα 91 - To find the area of a triangle. RULE. Multiply the base by half the...
Σελίδα 272 - Finished material shall be free from injurious seams, flaws, cracks, defective edges or other defects, and have a smooth, uniform and workmanlike finish. Plates 36 in.
Σελίδα 164 - RULE.* To the square of the radius of the base add the square of the middle diameter between the base and the vertex ; and this sum multiplied by the altitude, and the product again by .5236, will give the solidity.
Σελίδα 129 - NOTE. — If the diameter or radius is not given, add the square of half the chord of the arc to the square of the versed sine of half the arc ; this sum being divided by the versed sine, will give the diameter.