# The Modern Mechanic: A Scientific and Calculator, Comprising Rules and Tables in the Various Departments of Mechanical Skill and Labor

Bradley, Dayton, 1861 - 305 σελίδες

### Τι λένε οι χρήστες -Σύνταξη κριτικής

Δεν εντοπίσαμε κριτικές στις συνήθεις τοποθεσίες.

### Περιεχόμενα

 Arithmetic 11 Steam engine 248 Wedge the 133 51 Artificers work 108 Collision 118 Suction pump 223 Weight of materials 188 124 Conic sections 132 Floating bodies 141 Fractions decimal 168
 Heat 192 Timber measurement of 107 Wind 229 204 TABLES 210 Hydrostatics 217 Capacities for heat 241 Pipe cast iron 191 226 Gauge points 264 Specific heat 242 Hyperbela 264 Heat effects of 240 Steam vessels 269

 Gravity specific 182

### Δημοφιλή αποσπάσματα

Σελίδα 20 - Multiply the numerators together for a new numerator, and the denominators together for a new denominator.
Σελίδα 21 - Rule. — Multiply the whole number by the denominator of the fraction, add the numerator to the product and place the denominator under the result.
Σελίδα 23 - The denominator of a decimal, though never expressed, is always the unit, 1, with as many ciphers annexed as there are figures in the decimal.
Σελίδα 121 - Powers, are certain simple instruments, commonly employed for raising greater weights, or overcoming greater resistances, than could be effected by the natural strength without them. These are usually accounted six in number, viz. the Lever, the Wheel and Axle, the Pulley, the Inclined Plane, the Wedge, and the Screw.
Σελίδα 61 - In a right triangle, the side opposite the right angle is called the hypotenuse and is the longest side.
Σελίδα 57 - Line. 7. A Curve continually changes its direction between its extreme points. 8. Lines are either Parallel, Oblique, Perpendicular, or Tangential. 9. Parallel lines are always at the same perpendicular distance ; and they never meet, though ever so far produced. 10. Oblique lines change their distance, and would meet, if produced on the side of the least distance.
Σελίδα 75 - At a given point A, in a line AB, to make an angle equal to a given angle C. From the centres A and C, with any one radius, describe the arcs DE, FG. Then, with radius DE, and centre F, describe an arc, cutting FG in G. Through G draw the line AG, and it will form the angle required.
Σελίδα 113 - GLAZIERS' WORK. GLAZIERS take their dimensions, either in feet, inches, and parts, or feet, tenths, and hundredths. And they compute their work in square feet. ' In taking the length and breadth of a window, the cross bars between the squares are included. Also windows of round or oval forms are measured as square, measuring them to their greatest length and breadth, on account of the waste in cutting the glass.
Σελίδα 73 - The areas of circles are to each other as the squares of their diameters.
Σελίδα 61 - The circumference of every circle is supposed to be divided into 360 equal parts, called degrees ; and each degree into 60 equal parts, called minutes ; and each minute into 60 equal parts, called seconds ; and these into thirds, &c.