Adhesion and Adhesives, Τόμος 1Elsevier, 1951 |
Αναζήτηση στο βιβλίο
Αποτελέσματα 1 - 3 από τα 53.
Σελίδα 76
... range of surface forces . J. J. BIKERMAN 64 has another theory to explain the decrease in tensile strength if the thickness of the adhesive is increased . He does not believe in long - range molecular forces , but he analyzes his own ...
... range of surface forces . J. J. BIKERMAN 64 has another theory to explain the decrease in tensile strength if the thickness of the adhesive is increased . He does not believe in long - range molecular forces , but he analyzes his own ...
Σελίδα 124
... range of temperatures and by definition 41 the annealing range is contained within the temperatures at which glass loses 9 / 10ths of any internal stress in 15 minutes ( upper limit ) and 4 hours ( lower limit ) . If kept within this range ...
... range of temperatures and by definition 41 the annealing range is contained within the temperatures at which glass loses 9 / 10ths of any internal stress in 15 minutes ( upper limit ) and 4 hours ( lower limit ) . If kept within this range ...
Σελίδα 482
... RANGE 33-34LM / M WIDTH B SCT 2 STEADY LOAD 3348 / IN WỚTH 3 TESTS RANGE 29-34 LOAN WIDTH Fig . 200. Autographic record obtained Fig . 201. Influence of direction of rolling of strip on in CHADWICK test . ( i ) Impact tests CHADWICK ...
... RANGE 33-34LM / M WIDTH B SCT 2 STEADY LOAD 3348 / IN WỚTH 3 TESTS RANGE 29-34 LOAN WIDTH Fig . 200. Autographic record obtained Fig . 201. Influence of direction of rolling of strip on in CHADWICK test . ( i ) Impact tests CHADWICK ...
Περιεχόμενα
GENERAL CONDITIONS FOR WETTING AND FOR ADHESION | 3 |
MOLECULAR FORCES | 13 |
RHEOLOGY OF ADHESIVES | 52 |
Πνευματικά δικαιώματα | |
21 άλλες ενότητες δεν εμφανίζονται
Άλλες εκδόσεις - Προβολή όλων
Συχνά εμφανιζόμενοι όροι και φράσεις
abrasive acetate acid addition adherends adhesive layer alkali amylopectin amylose animal glue applied asphaltic bitumen bitumen bond cellulose cement CH₂ Chem chemical chlorinated clay coating colloidal composition compounds compressive concentration corrugated deformation depends dextrines dilute dried drying elastic factor fiber fillers film formaldehyde glass glue solution glued groups hardening heat humidity increase industry kg/cm² laminated lap joints latex lbs/sq liquid load manufacture materials metal mixture modulus moisture molecular weight molecules Na,O Na₂O Neoprene obtained oxide paper particles penetration phenol plastic plate plywood polar polymer polymerisation polyvinyl polyvinyl acetate properties ratio react reaction resorcinol rheological shear strength shear stress sheet silicate solution sodium silicate sodium silicate adhesives solid soluble solvent starch structure sulphur surface TABLE tackiness temperature tensile strength tension thermoplastic thickness thixotropy urea viscosity vulcanization water resistance wetting wood