Encyclopedia of Engineering: A Treatise on Boilers, Steam Engines, the Locomotive, Electricity, Machine Shop Practice, Air Brake Practice, Engineer's Catechism, Gas, Oil, Traction and Automobile Motors, Refrigeration, Etc., Etc, Τόμος 7

International School of Engineering, 1906

Αναζήτηση στο βιβλίο

Άλλες εκδόσεις - Προβολή όλων

Συχνά εμφανιζόμενοι όροι και φράσεις

Δημοφιλή αποσπάσματα

Σελίδα 384 - When a straight line standing on another straight line makes the adjacent angles equal to one another, each of the angles is called a right angle ; and the straight line which stands on the other is called a perpendicular to it.
Σελίδα 400 - AB of the circle into as many equal parts as the polygon is to have sides. With the points A and B as centers and radius AB, describe arcs cutting each other at C.
Σελίδα 387 - A circle is a plane figure contained by one line, which is called the circumference, and is such, that all straight lines drawn from a certain point within the figure to the circumference are equal to one another : 16. And this point is called the centre of the circle.
Σελίδα 393 - A cone is a solid figure described by the revolution of a right-angled triangle about one of the sides containing the right angle, which side remains fixed.
Σελίδα 392 - A prism is a solid figure contained by plane figures, of which two that are opposite are equal, similar, and parallel to one another ; and the others parallelograms.
Σελίδα 393 - The diameter of a sphere is any straight line which passes through the centre, and is terminated both ways by the superficies of the sphere.
Σελίδα 399 - Let AB be the straight line to be divided into a certain number of equal parts: From the points A and B, draw two parallel lines AD and BC. at any convenient angle with the line AB. Upon AD and BC set off one less than the number of equal parts required, as Al, 1-2, 2-D, etc. Join Cl, 2-2, 1-D, the line AB will then be divided into the required number of equal parts.
Σελίδα 292 - Horse-Power Constant of an engine is found by multiplying the area of the piston in square inches by the speed of the piston in feet per minute and dividing the product by 33,000. It is the power the engine would develop with one pound mean effective pressure. To find the horse-power of the engine, multiply the MEP of the diagram by this constant.
Σελίδα 390 - A Tangent is a straight line which touches the circumference but does not intersect it, however far produced. The point in which the tangent touches the circumference is called the Point of Contact, or Point of Tangency. 171. DEF. Two Circumferences are tangent to each other when they are tangent to a straight line at the same point.
Σελίδα 406 - Let ACBD be the given circle: Draw the diameters AB and CD at right angles to each other. With any convenient radius and centers A, C, B and D describe arcs intersecting each other at E, H, F and G. Join EF and GH which form two additional diameters. At the points AB and CD draw the lines KL, PR, MN and ST, parallel with the diameters CD and AB respectively.

Πληροφορίες βιβλιογραφίας